2025-2026教师科研成果（论文） | ||||
| 序号 | 作者 | 论文题目 | 发表刊物 | 发表日期 |
| 1 | 郑勇 | 基于双磨粒磨削的TC4轴件去除机理研究 | 组合机床与自动化加工技术 | 2026-08-03 |
| 2 | 刘晓凤 | 优化高校辅导员队伍建设机制 | 中国社会科学报 | 2026-06-24 |
| 4 | 丁永峰 | Effects of fibre distributions on the transverse damage behaviour in unidirectional continuous fibre-reinforced composites | COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2026-06-01 |
| 6 | 唐帮备 | Research on a motion sickness prediction model for vehicle occupants based on vehicle dynamics parameter thresholds | Applied Ergonomics | 2026-03-30 |
| 7 | 景彦霞 | 新时代科学家精神融入高校思想政治教育的理论逻辑与实践路径 | 兰州石化职业技术大学学报 | 2026-03-20 |
| 9 | 唐帮备 | Research on driving fatigue detection and arousal based on brain functional connectivity networks | Traffic Injury Prevention | 2026-03-07 |
| 10 | 唐帮备 | Optimization and validation of multiscale feature selection for EEG-based recognition of drivers’ negative emotions | Traffic Injury Prevention | 2026-02-14 |
| 13 | 丁永峰 | Micromechanical modelling of unidirectional continuous fibre-reinforced composites: A review | COMPOSITES PART B-ENGINEERING | 2026-01-15 |
| 14 | 陈蕾 | Influence of FeSiB Layer Thickness on Magnetoelectric Response of Asymmetric and Symmetric Structures of Magnetostrictive/ Piezoelectric Composites | Journal of Composites Science | 2025-12-12 |
| 15 | 梁爽 | DSCG-YOLO: a lightweight visual inspection model for exoskeleton in stair walking scenarios | Signal Image and Video Processing, Image and Video Processing | 2025-12-05 |
| 16 | 唐帮备 | 智能座舱中驾驶员异常情绪的识别与调控研究综述 | 汽车文摘 | 2025-12-03 |
| 17 | 尹翰坤 | Hybrid Modeling and Rapid Prototyping Technology Based on Geomagic | Scientific Reports | 2025-11-27 |
| 18 | 郑讯佳 | 基于自适应预测时域MPC的轨迹跟踪控制 | 汽车安全与节能学报 | 2025-10-15 |
| 19 | 徐照英 | 钛合金表面硅铜共掺杂类金刚石复合薄膜微观结构与摩擦学性能研究 | 材料导报 | 2025-09-26 |
| 20 | 王婷 | Social Exclusion and Aggression: the Mediating Role of Self-Control and Moderating Role of Self-Compassion. | Journal of interpersonal violence | 2025-09-25 |
| 21 | 郑讯佳 | An Improved Modeling Method for Driving Risk by Considering Driver–Vehicle–Road Factors | IEEE Transactions on Intelligent Transportation Systems | 2025-09-04 |
| 22 | 唐帮备 | 基于脑电信号的驾驶员意图与风险驾驶状态识别综述 | 汽车工程学报 | 2025-09-01 |
| 23 | 赵立军 | 山地小型增程式油—电混动履带旋耕机动力匹配机制与控制策略研究 | 智能化农业装备学报（中英文） | 2025-08-19 |
| 24 | 曾治亨 | Experimental and Numerical Study on the Restitution Coefficient and the Corresponding Elastic Collision Recovery Mechanism of Rapeseed | Agronomy-Basel | 2025-08-01 |
| 25 | 唐帮备 | Investigating the impact of different road scenarios on the induction intensity of motion sickness in electric vehicle passengers | Frontiers in Psychology | 2025-08-01 |
| 26 | 曾冲 | Diagnosis and Locating Method for PMSM Interturn Fault Using Less Search Coils | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT | 2025-07-15 |
| 28 | 唐帮备 | Research on auditory and olfactory regulation methods for abnormal driver emotions based on EEG signals | Frontiers in Human Neuroscience | 2025-06-16 |
| 29 | 郑讯佳 | Research on trajectory tracking control based on adaptive prediction time-domain MPC | 2025 Joint International Conference on Automation-Intelligence-Safety (ICAIS) & International Symposium on Autonomous Systems (ISAS) | 2025-05-23 |
| 30 | 黎斌 | Experimental and Numerical Study on Dynamic Porosity of the Flow Layer During the Paddy Grain Convective Drying Process | AgriEngineering | 2025-05-22 |
| 31 | 安超 | Structural design and dynamic simulation analysis of lower limb exoskeleton robot based on pneumatic muscle | Journal of Physics: Conference Series | 2025-05-15 |
| 32 | 梁爽 | 基于气动肌肉驱动及磁流变制动器辅助下的柔性关节轨迹控制 | 机床与液压 | 2025-05-14 |
| 33 | 苏永要 | Mo-DLC/Mo 薄膜在甲醇中的摩擦学性能研究 | 表面技术 | 2025-05-10 |
| 34 | 唐帮备 | 电动汽车乘员晕车诱发机制与治理方法综述 | 汽车文摘 | 2025-05-05 |
| 35 | 陈星 | Drivable area recognition on unstructured roads for autonomous vehicles using an optimized bilateral neural network | Scientific Reports | 2025-04-30 |
| 36 | 赵立军 | Recognition and localization method of maize weeding robot based on improved YOLOv5 | INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING | 2025-04-16 |
| 37 | 张富兵 | Novel method for measuring high-frequency wheel-rail force considering wheelset vibrations | Scientific Reports | 2025-04-15 |
| 38 | 彭帅 | 点接触直齿轮副的构建及接触分析 | 航空动力学报 | 2025-04-01 |
| 39 | 贺小龙 | Influence of length variation at the transition section of anchor joint on the current-carrying wear property of carbon skateboard_contact wire contacts | Tribology International | 2025-04-01 |
| 41 | 赵立军 | Optimization design and experiment of key components of mountain pendulum-lever cam type hole seeders based on DEM-MBD coupling simulation | PLOS ONE | 2025-03-14 |
| 42 | 罗天洪 | 基于EEMD-LSTM的下肢膝关节运动角度预测研究 | 机械设计与研究 | 2025-02-20 |
2025-2026教师科研成果（著作） | |||||||
| 序号 | 作者 | 著作名称 | 出版单位 | 出版时间 | 著作种类 | ISBN号 | 作者排名 |
| 1 | 郑勇 | 双层织构化滑动轴承界面性能 | 科学出版社 | 2025-11-27 | 专著 | 978-7-03-082551-3 | 3 |
| 2 | 景彦霞 | 新时代科学家精神融入老员工创新素养培育研究与实践 | 延边大学出版社 | 2025-09-15 | 专著 | 978-7-230-08567-0 | 1 |
| 3 | 李强 | 基于大数据时代的高校教育模式创新与实践探索 | 南洋国际科学出版社 | 2025-09-02 | 专著 | 978-629-7807-47-8 | 1 |
| 4 | 贺小龙 | 机械振动理论与应用研究 | 维泽科技出版社 | 2025-08-01 | 专著 | 979-8-9573-3212-1 | 1 |
| 5 | 段正勇 | 高加速度冲击激励与测试技术 | 化学工业出版社 | 2025-06-01 | 专著 | 978-7-122-47597-8 | 1 |
2025-2026教师科研成果（专利） | ||||||
| 序号 | 第一发明人 | 专利名称 | 专利类型 | 授权号 | 授权日期 | 备注 |
| 1 | 郑讯佳 | METHOD AND SYSTEM FOR LOCAL TRAFFIC SAFETY ASSESSMENT FROM AUTONOMOUS VEHICLE PERSPECTIVE | 发明 | LU603172 | 2026.03.09 | |
| 2 | 张雪峰 | SOLAR HEAT EXCHANGE DEVICE AND METHOD | 发明 | LU606333 | 2026.07.13 | |
| 3 | 张雪峰 | GENERAL-PURPOSE RICE AND WHEAT COMBINE HARVESTER SUITABLE FOR COMPLEX TERRAIN. | 发明 | LU603297 | 2026.02.19 | |
| 4 | 唐帮备 | INTELLIGENT CONTROL ODOR CONCENTRATION REGULATION DEVICE AND APPLICATION METHOD THEREOF | 发明 | LU600612 | 2025.10.10 | |
| 5 | 马翔宇 | 柔性机械臂 | 实用新型 | 202422876869 .4 | 2025.11.25 | |
| 6 | 黎斌 | 一种太阳能换热装置及方法 | 发明 | 202411425239.3 | 2025.10.28 | |
| 7 | 马翔宇 | 仿生跳跃机器人 | 实用新型 | ZL 2024 2 2047179.8 | 2025.08.22 | |
| 8 | 杨艳 | 一种茶叶嫩芽智能采摘设备 | 发明 | 202410980292.3 | 2026.09.15 | |
| 9 | 杨艳 | 一种茶叶嫩芽智能采摘设备 | 发明 | 202410980298.0 | 2026.3.17 | |
| 10 | 黎斌 | 一种反向光照的太阳能集热装置 | 实用新型 | 202421699909.6 | 2025.08.19 | |
| 11 | 彭帅 | CIRCULAR ARC SPUR GEAR PAIR AND ITS DESIGN METHOD | 发明 | LU600250 | 2025.04.22 | |
| 12 | 曹川川 | 一种片状件收集装置和收集方法 | 发明 | CN 116620870 B | 2025.10.03 | |
| 13 | 伍国果 | 一种门饰板检具装置 | 发明 | 202211604144.9 | 2025.07.08 | |
| 14 | 陈星 | 结合能量管理与扭振抑制的混合动力传动系统驱动控制方法 | 发明 | ZL 2022 1 0750549.7 | 2025.11.04 | |
| 15 | 郑讯佳 | 基于改进YOLOv4模型的车辆检测方法 | 发明 | 202111677392.1 | 2025.03.28 | |
| 16 | 段正勇 | 基于两级速度放大器的气动高g值冲击激励装置 | 发明 | ZL 2021 1 1321404.7 | 2025.05.09 | |
| 17 | 郑讯佳 | 人-車-道路の各要素を総合的に考慮した運転リスクの統一的定量化方法 | 发明 | 特願2022-567559 | 2025.04.22 | |
2025-2026教师科研成果（成果获奖） | ||||||
| 序号 | 获奖人 | 成果名称 | 奖励名称 | 奖励类别 | 获奖日期 | 备注 |
| 1 | 赵立军 | 遥控式梯田稻麦收割机 | 中国农业农村重大科技新成果 | 国家一级学会、一级行业协会组织的成果奖励 | 2025-11-01 | |
| 2 | 吕程 | 乘坐式微耕机的开发与应用 | 重庆市农业机械学会科技进步奖 | 其他奖励 | 2025-10-31 | |
| 3 | 唐帮备 | 智能座舱与人机交互 | 汽车智能交通技术创新成果奖 | 国家一级学会、一级行业协会组织的成果奖励 | 2025-09-20 | |
| 4 | 赵立军 | 丘陵山地小型自走履带式谷物联合收割机创新研发及产业化 | 重庆市科学技术奖 | 省（自治区、直辖市）级科学技术奖 | 2025-08-01 | |
